Instructions For Removing Various Parts Of The Soft Top Of The 2012 Jeep Wrangler

  • Dealership Ohio
  • Comments Off on Instructions For Removing Various Parts Of The Soft Top Of The 2012 Jeep Wrangler

Here instructions for common questions about removing various parts of the soft top of the 2012 Jeep Wrangler. The guides below will answer how to partially remove the soft top, how to remove the rear window, how to remove the quarter window, and how to lower the full soft top. For the first few times, having an extra set of hands might be beneficial for you, until you get the hang of it.

How do I partially remove the soft top on my 2012 Jeep Wrangler?
  1. Unclip the sun visors and move them out of the way
  2. Release the header latches from the loops on the windshield frame
  3. Take the header and soft top and fold them back
  4. Locate the straps to secure the side bows
  5. Wrap the straps around the bows, on both sides
  6. Reposition the sun visors
  7. Enjoy!
How do I remove the rear window in my 2012 Jeep Wrangler?
  1. Unclip the sun visors and move them out of the way
  2. Release the header latches from the loops on the windshield frame
  3. Move to the back of the Jeep and open the swing gate
  4. Pull open the first three inches of the sail panel on both sides
  5. Partially unzip the rear window on the passenger side. (This makes it easier to get to the tailgate bar)
  6. Pull the tailgate bar straight back from the body side clips
  7. Finish unzipping the rear window from the passenger side
  8. Store it in a place where it won’t get scratched or dirty
  9. Enjoy!
How do I remove the quarter window in my 2012 Jeep Wrangler (2 door)?
  1. Release the Velcro flaps at the rear and the top of the quarter window
  2. Start to unzip the window from the rear lower corner
  3. When the window is unzipped, release the body side retainer and the door rail retainer (a gentle tug is all it should take)
  4. Remove the window on the other side the same way
  5. Store them where they won’t get scratched or dirty
  6. Enjoy!
How do I lover the full soft top on my 2012 Jeep Wrangler (2 door)?
  1. Release the Velcro flaps at the rear and the top of the quarter window
  2. Start to unzip the window from the rear lower corner
  3. Once the window is unzipped, release the body side retainer and the door rail retainer (a gentle pull is all it should take)
  4. Remove the window on the other side the same way
  5. Store them where they won’t get scratched or dirty
  6. Next, un-tuck the sail panels from the body side at the rear corners
  7. Pull down on the three bow to release tension
  8. Fold the sail panels up so they rest on top of the vehicle
  9. Unlatch the side bows from the door panels by pressing on the latch petal from behind
  10. Make sure the plastic sleeve is in place over the link
  11. Lower the top (Make sure you tuck the material inside the 2012 Jeep Wrangler neatly. This is when the extra set of hands is helpful.)
  12. The side bows should be folded to form a V-shape
  13. Enjoy!

(NOTE: please also refer to your owner’s instruction manual, as this is not intended to replace those instructions)

Back to top