The Jeep Cherokee will be offered to the Dayton area with multiple drive types available. Each drive type is design for maximize driving ability for minimal cost. Below is a summary and breakdown of the drive types available to the Dayton area.
Jeep Active Drive I
Available on the Cherokee Sport, Latitude and Limited models, Jeep Active Drive I features a single power transfer unit (PTU) which is fully automatic and delivers seamless operation in and out of four-wheel drive at any speed. The system does not require any driver intervention or feedback, delivers yaw correction during dynamic events and improves both understeer and oversteer conditions.
Jeep Active Drive II
Available on the Cherokee Sport, Latitude and Limited models, Jeep Active Drive II includes a two-speed PTU with torque management and low range. 4-Low mode locks the front and rear drive shafts for low-speed power or towing. Low range provides a 2.92:1 gear reduction. The gear reduction allows for enhanced climbing ability as well outstanding crawl ratios for severe off-road conditions. The 2014 Jeep Cherokee with Jeep Active Drive II gives the off-road adventurer a ride height that is increased by an inch, a crawl ratio of 56:1 when powered by the 2.4-liter MultiAir2 Tigershark I-4 engine, and 47.8:1 when powered by the new 3.2-liter Pentastar V-6 engine – up to a 90-percent improvement versus the outgoing model.
Jeep Active Drive Lock
Jeep Active Drive Lock includes all the features of Jeep Active Drive II and adds a locking rear differential for superior low-speed power for severe off-road conditions. Jeep Active Drive Lock is standard on all Trailhawk models. All 4×4 systems feature the Jeep brand’s renowned Selec-Terrain traction control system, which allows the driver to choose the on- and off-road setting for optimum performance. Five customized settings are offered: Auto, Snow, Sport, Sand/Mud and Rock. Through the use of algorithms that enable unsurpassed control and capability, Selec-Terrain electronically coordinates and optimizes up to 12 systems on any terrain providing enhanced vehicle control including: drivetrain control module, electronic brake controller, electronic stability control (ESC), transmission controller, powertrain controller and Selec-Speed Control (Hill-ascent and Hilldescent Control).
Jeep Cherokee Trailhawk: Trail Rated
The all-new 2014 Jeep Cherokee Trailhawk model exemplifies Jeep 4×4 capability with a distinctive, aggressive look, backed up by Jeep Trail Rated hardware, for the most capable Jeep Cherokee model and the most capable mid-size SUV in the segment. The Trailhawk includes as standard equipment aggressive approach and departure angles, complements of the unique front and rear fascias, one-inch factory lift, Jeep Active Drive Lock with locking rear differential, skid plates and signature red tow hooks. The locking rear differential is selectable in any low range terrain mode, but will lock automatically when in certain modes, such as “Rock,” to maximize tractive effort at the tire patch that can support it. The Jeep Cherokee Trailhawk boasts an approach angle of 29.8 degrees, a departure angle of 32.1 degrees and breakover angle of 23.3 degrees. Running ground clearance is 8.7 inches.
