Jeep Grand Cherokee: How to Adjust the Headlights
- January 3, 2013
- Dealership Ohio
- Posted by LukeS
- Comments Off on Jeep Grand Cherokee: How to Adjust the Headlights
If the headlights on your new Jeep Grand Cherokee don’t seem to be illuminating the road properly, you may need to adjust them. Follow these steps to properly adjust the headlights on your Jeep Grand Cherokee.
What You’ll Need
Phillips screwdriver, Torx tool head, or Allen wrench.
Instructions
- Park your Jeep Grand Cherokee on a flat surface that is approximately 25 feet away from a garage door or a flat wall.
- Turn your engine off and your headlights on. Make sure that the low beams are on and the high beams are off.
- Open the hood of your Jeep Grand Cherokee.
- Lift the headlamp covers to expose the alignment screws on the headlamp.
- Use the Phillips screwdriver, Torx tool head, or Allen wrench to rotate the alignment screws.
- You should adjust the headlight beam to be approximately three feet above the ground.
- Replace the covers that have been removed.
- Close the hood of the vehicle.
