Tag: Dayton

The Dodge Grand Caravan can hold up to 7 people.

The Dodge Grand Caravan is a cross-functional vehicle that is home to the industry-exclusive Super Stow ‘n Go seating. It converts the 7-passenger mini-van to a flat-load floor.

You have a choice of seating for seven, or lots and lots of cargo space – or somewhere in between. Not only can you fold the seats down to a flat-floor surface, but there are 81 possible seat configurations.

The seats are removable and collapsible and there is access to built-in storage tubs. The storage bins provide you with an additional 12 cubic feet of storage space. They are great for storing toys, sports equipment, grocery bags, diaper bags, and more.

With 143 cubic feet of storage, you are sure to be [...]

There are two ways to lower the convertible top on your new Chrysler 200. You can lower the convertible top from the inside of your vehicle using the switch between the seats located at the font of the center console.

Of, you can lower the top remotely by pressing the button on your key fob.

Make sure to have your car in a stationary position, otherwise the top will not move. The cargo shield is found in the trunk.

Before you lower the convertible top, unfold the cargo shield and seat the tabs at each end of the cargo shield in the v-slots in the trunk liner. This is important because it closes a switch that allows the top to be operated. If the switch is [...]

Before adding transmission fluid to your Chrysler 300, you should make sure that your engine was running when you checked the transmission fluid levels. If the level is low, you need to add fluid by using the dipstick tube.

1. In the cabin of the Chrysler 300, locate the hood release lever. Pull to release the hood.
2. Release the safety catch and raise the hood up
3. Next, locate the transmission fluid cap. Some models do not have a transmission fluid dipstick. If that is the case, consult with your mechanic to check the transmission fluid level.
4. Remove the reservoir cap to add fluid.
5. Consult your owners’ manual to determine the type of transmission fluid your vehicle will need. You can generally find this information toward the back of the manual under a section called “fluid, capacities, and specifications” or something of the like.
6. Remove the dipstick from the dipstick tube and place a funnel in [...]

Need help changing the oil in your 2012 Jeep Patriot? Gather the materials you’ll need and follow these directions:
What you will need:

• Large funnel
• Filter changing tool
• Replacement filter
• Replacement motor oil
• Plastic bin
• Adjustable wrench
• Recommended: plastic or latex gloves
• Recommended: paper towels

Directions:

1. Monitor the temperature display in the instrument cluster. Wait until the oil gauge shows as lukewarm. You want to ensure you are not draining dirty oil that will scald your hands and result in an injury.
2. Put on the recommended plastic or latex gloves to keep your hands clean
3. Slide under the vehicle from the front. If you aren’t comfortable with this, use a car jack and two car jack stands to raise the car for more room
4. Find the oil pan. It looks like a large metal box and is located under the engine. There is a drain plug which sticks out from the [...]

Opening the hood in a 2012 Jeep Compass is not difficult, but it can be very tricky if you don’t know where to look for the hood release lever. Use the following instructions to open the hood in a 2012 Jeep Compass:

1. Locate the hood release lever. This is below the instrument panel, below the steering wheel on the left, in front of the driver’s door
2. Once you locate the hood release lever, pull the level to release the hood
3. Go to the front of the Jeep Compass. Carefully raise the hood and find the safety latch. This should be in the middle of the hood opening
4. Move the safety latch at the same time as lifting the hood
5. Locate the support rod and place it into the slot on the hood to hold the hood up
6. To close the hood, [...]

Before anything else, make sure to gather your materials and tools. Be sure to have several screwdrivers, with various heads just in case: Philips, flathead, and Torx. Since the door is attached with snaps and clips, you will need a thin yet durable utensil for prying. Perhaps try a small putty knife or another screwdriver.

Next, you will want to remove the screws. In the door panel of the Jeep Grand Cherokee, there are three screws. Be on the lookout for a Philips head screw in the door pull tray, one that is neighboring to the side mirror, and a Torx screw that is behind the door handle.

Next, you’ll detach the panel from the door. Use your tool (like the putty knife) to pry the panel away from the door. You should hear a snapping noise which is the sound of [...]

The Dodge Grand Caravan has a seating and storage system called Stow ‘n Go that gives you room and options for the rear seating in your vehicle. The second and third row seats have the ability to fold down to in-floor storage compartments that become a completely flat floor that is great for storage. Follow these step by step directions to easily fold the Stow ‘n Go seats:

1. Put the driver and passenger seat all the way forward before you fold down the second row seats
2. Raise the armrests on the second row seats
3. Push the head restraints down to the locked position
4. Next, move the storage bin lock to “Locked” then pull the latch which opens the storage bin cover
5. Look on the right side of the seat and find the seat recliner lever which folds the seat up
6. Find the release strap which is at the back of the seat. Push the [...]

The gas cap door cover can be a little tricky if you don’t know what to look for. The Chrysler 300 has capless gas area, but has a door that needs to be popped open to access the opening. It is not immediately obvious as to where the button is that gets pressed to access the gas tank door. The button is located on the driver’s side door. It is below the standard buttons (like the window controls) and above the storage compartment on the door. Look closely!

Unless reset, the “Change Oil” or the “Oil Change Required” message will continue to be illuminated in the instrument cluster of your Chrysler 300 each time you turn the ignition switch to the “on” position. To reset the oil change indicator system after performing the scheduled maintenance, turn the ignition switch to the “on” position, but do not start the engine. Next, fully depress the accelerator pedal slowly three times within ten seconds and turn the switch back to the “lock” position. If either of the messages still appears in your view, the system did not reset and you should repeat the previous action.

The RAM 1500 is built for strength and power. With up to 390 horsepower, the RAM 1500 has a maximum towing capacity of 10,459 pounds! The RAM 1500 powertrain goes beyond the impressive towing capabilities. Not only is this a great vehicle for towing and hauling, it does not come with the high mpg that most towing and hauling vehicles do. This truck is efficient with 20 MPG highway across the entire light-duty line of engines. This truck gives you the best of both worlds.